"Tech Solutions - one byte at a time!"
DigiBytes.com is the digital library of solutions for business and technology professionals.

Login Register Login
For Admins

electrical safety

Results 1 - 6 of 6Sort Results By: Published Date | Title | Company Name
Published By: Eaton     Published Date: Jul 09, 2018
Code updates happen for one main reason: safety improvement. NEC (National Electrical Code) Article 408.3 helps take electrical safety for service entrance panels to a new level. The code, updated in 2017, includes provisions to provide shock protection via panelboard barriers. The barriers protect from energized conductors on the line terminals of the main overcurrent protection device (OCPD) in a panelboard. When the main circuit breaker in a panel is turned off, line side terminals and conductors remain energized from upstream via the utility or another panelboard. With these barriers in place and the main OCPD turned off, installers are better protected when pulling wires into the panelboard. Today, all panelboards are shipped with shock-protective barriers. However, barriers are new to installation procedures, so contractors may not recognize them and accidentally throw them out—easily and often.
Tags : 
    
Eaton
Published By: Schneider Electric     Published Date: Jun 06, 2017
Could you do more for worker safety? Protective gear alone can't prevent arc flash injury. In fact, according to NFPA 70E, injuries sustained during an arc ?ash event would be reduced and survivable due to arc-rated PPE. Complying with the safe work practices required by NFPA 70E and implementing arc flash mitigation strategies through engineering controls will enhance workplace safety for employees and lower financial risk for your company. Read the white paper, "Mitigating Arc Flash Hazards", for more information.
Tags : 
arc flash, nfpa 70e compliance, electrical workplace safety, arc flash risk assessment, arc flash analysis, arc flash mitigation solutions
    
Schneider Electric
Published By: Schneider Electric     Published Date: Nov 21, 2017
Could you do more for worker safety? Protective gear alone can't prevent arc flash injury. In fact, according to NFPA 70E, injuries sustained during an arc ?ash event would be reduced and survivable due to arc-rated PPE. Complying with the safe work practices required by NFPA 70E and implementing arc flash mitigation strategies through engineering controls will enhance workplace safety for employees and lower financial risk for your company. Read the white paper, "Mitigating Arc Flash Hazards", for more information.
Tags : 
arc flash, nfpa 70e compliance, electrical workplace safety, arc flash risk assessment, arc flash analysis, arc flash mitigation solutions
    
Schneider Electric
Published By: Schneider Electric     Published Date: Nov 21, 2017
If not, you are increasing the risk for costly, unplanned downtime. However, despite the importance of having a reliable flow of electricity, over half of building owners rely on reactive maintenance programs to care for their equipment. This means they wait until equipment fails completely before initiating corrective action, which is typically 3-4 times more costly than taking preventive measures. A good first step to go from being reactive to proactive is having a power system assessment performed. While often deemed expensive or unnecessary, the truth is power system assessments reveal opportunities to modernize, imiprove performance and help protect employees. To learn more, download our checklist, ""Ten Ways a Power System Assessment Can Save You Money""."
Tags : 
reliable power system, electrical assets, power system assessment, modernization, electrical workplace safety
    
Schneider Electric
Published By: Schneider Electric     Published Date: Jan 02, 2018
Could you do more for worker safety? Protective gear alone can't prevent arc flash injury. In fact, according to NFPA 70E, injuries sustained during an arc ?ash event would be reduced and survivable due to arc-rated PPE. Complying with the safe work practices required by NFPA 70E and implementing arc flash mitigation strategies through engineering controls will enhance workplace safety for employees and lower financial risk for your company. Read the white paper, "Mitigating Arc Flash Hazards", for more information.
Tags : 
arc flash, nfpa 70e compliance, electrical workplace safety, arc flash risk assessment, arc flash analysis, arc flash mitigation solutions
    
Schneider Electric
Published By: Schneider Electric     Published Date: Apr 16, 2018
"Institute of Electrical and Electronics Engineers (IEEE) standard 1584 has been the de facto standard for calculating the arc energy levels at different points in a power system. However, NFPA 70E provides the option of using the Arc Flash Hazard PPE Category task tables for PPE selection. Which is right for you, and what do you need to know about each option? Find answers in our white paper, which describes how both types of analysis systems work and how to be sure you are using the tables correctly."
Tags : 
arc flash, nfpa 70e compliance, ieee, electrical workplace safety, arc flash risk assessment, arc flash analysis, arc flash mitigation, solutions, ppe, tables, arc flash hazard, osha, electrical safety
    
Schneider Electric
Search      

Special Report

In this webinar Black Duck Software (www.blackducksoftware.com), together with representatives of SAP, will review the benefits open source offers to development organizations, the management challenges it presents, and approaches for addressing those challenges.

Add Research

Get your company's research in the hands of targeted business professionals.

Modern Analyst Media Modern Analyst Media
Modern Analyst Requirements Modern Analyst Media Modern Analyst DigiBytes
Copyright 2009-2014 by Modern Analyst Media LLC Home  |  Featured Bytes  |  Popular Bytes  |  All Topics  |  Vendor Directory